Two separate parts of a scuba helmet are the backplate (wing) and the wing (wing). Each piece is attached to a buoyancy compensator, which establishes positive buoyancy on the surface and neutral buoyancy underwater. Backplate is modular and can be taken apart from the wing. They are a good choice for divers not sure which type of scuba diving equipment to purchase. These pros and cons are listed below.
Stainless steel
A stainless steel back plate and wings can be purchased with or without an attached harness. For the wings and backplate, 316 stainless-steel will be used. It is extremely saltwater resistant. It is cut on a CNC cutter and polished manually to prevent sharp edges which can prematurely wear the strap. You can use them with either a single-air tank system or dual-air tank systems. You can remove the stainless steel wings and backplate for easy storage.
Backplates made of stainless steel are more heavy than those made from aluminium. Stainless steel backplates work well in colder climates and will reduce your weight while diving. Stainless steel backplates, unlike lead pieces, can be easily adjusted to fit most diving tanks. A Halcyon Dealer can offer weighting advice to help determine what size is best for you. You don't have as many to replace the backplate.
Plastic
While the buoyancy of the plastic back plate and wing is negative, it is still advantageous when replacing the weight on the weightbelt. Jacket BCDs have pockets and weight integration. However, the backplate and wing system does not have any of these ancillary features. These components can be purchased separately. These components can be purchased separately. This article will explain the pros and disadvantages of each. It is crucial that you choose the right type and size of back plate to suit your needs.
Softpack harness
There are different types of harnesses for back plate and wings. These include wing BCDs and backplates. They come with all the components needed, including a harness and backplate. Softpack BCDs are ideal for technical divers, since they are made of a lightweight, flexible material and are not attached to a rigid plate.
Steel backplate harnesses lack adaptability. The harness is not intended to be used with single tanks. Although the steel harness is the strongest option, it is cumbersome to use while traveling. It can only be used for double tanks. Also, the steel backingplate may not work well on land. This can be modified to work with single tanks using adapters but it is not recommended.